• Home
  • Installation Steps of Bonnet Protector

Installation Steps of Bonnet Protector

Catalogue

Installation Steps of Bonnet Protector with Clips 

Installation Steps of Bonnet Protector with Double-side Tape

Product

Bonnet Protector / Hood Protector / Bonnet Guard

Installation Steps of Bonnet Protector with Clips

  1. Hold up the protector against the door frame to ensure they are correctly aligned.

  2. Check the number of mounting accessories to ensure there are enough accessories.

  3. Thoroughly clean the front edge of your bonnet to remove any dirt or grease.

  4. Place the U-shaped iron piece on the back side of the protector and insert the circular piece and nut through the hole on the top.

  5. Repeat the steps for the others.

  6. After finish installation the accessories, align the protector with the bonnet so that the U-shaped iron pieces line up with the holes underneath the bonnet.

  7. Lock it in place with the NO.4 screw to complete the installation.

  8. Repeat the steps for the others.

Installation Steps of Bonnet Protector with Double-side Tape

  1. Hold up the protector against the door frame to ensure they are correctly aligned.

  2. Thoroughly clean the front edge of your bonnet to remove any dirt or grease, make sure the area is dry before proceeding to the next step.

  3. Apply adhesive promoter on the surface of vehicle where you will stick protector.

  4. Expose 2 inches of the tape liner from each section. Fold the tape liners back far enough to create pull tabs. 

  5. Carefully place the protector back into correct position. 

  6. Remove the tape, working from the center out to one side at a time.

  7. Grasp the exposed portion of the tape liner and pull slowly, while applying light, even pressure to the protector with the other hand.

  8. Repeat this step until all of the tape has been removed.

  9. Press down firmly along all the taped edges to ensure proper adhesion.

  10. Do not wash the car for 72 hours after installation.

 

Proper installation not only ensures the effectiveness of the protector, but also extends its life. We hope this guide has helped you with the installation process!