Installation Instructions for Door Sills Protector
PRODUCT
Door Sills Protector / Door sills
Installation Steps
Follow these instructions to ensure a smooth and secure installation:
1. Test for Proper Fit
- Check Alignment: Position the door sills on your vehicle. Adjustment to the proper position to ensure they fit properly. Verify that they align correctly with the contours of the door area.
2. Clean the Surface
- Prepare the Area: Thoroughly clean the area where the door sills will be installed. Use a mild soap and water solution to remove dirt, grime, or residue. Ensure the surface is completely dry before proceeding.
3. Apply Adhesive (Optional)
- Enhance Adhesion: Applying an adhesive can help stickers work better. Apply a small amount of promoter directly on the adhesive tape or the vehicle’s surface where the sills will be placed.
4. Install the Door Sills Protector
- Peel and Stick: Carefully tear off the backing tape from the door sills. Align them with the cleaned area on your vehicle. Once positioned correctly, press down firmly along the entire length to ensure a strong, secure bond. Ensure no air bubbles are trapped underneath.
5. Test and Set
- Check Functionality: After installation, open and close the doors to verify that they operate smoothly.
- Curing Time: Avoid washing your car for at least 48 hours after installation. This allows the adhesive to fully set and cure, ensuring long-lasting adhesion.
By following these instructions, you can ensure a clean and effective installation of your door sills, enhancing your vehicle’s interior while maintaining its functionality.